Please Wait |
|
Please Wait |
Before installing new brake pad,check the old brake pad.
1-Before installing new brakepad,check the old brakepad.If uneven corrosion of pads and brake diskis observed,it should be checked and controlled.If the disk is wraped or distorted,replace the brake disk.
2-After removing the brake disk,the contact surface and edges of wheel hin must be completely de-rusted.Using a sutible tool(such as sand paper)
3-While replacing the pad,make sure the new pad clean of any type of contamination(such as dust,oil,...)
4-while buying,pay attention to the engraving of the FGP name on the piece.
NOTICE:If your hands are oily when changing the pad.clean your hands.oily hand causes the surface become oily and not function properly.
In the end,it is recommended if it is needed to change your brake disk.use the FGP brake disk as the better performances.
TECHNICAL GROUP OF FARHANG GHATE PISHTAZ
FARHANG GHATE PISHTAZ INDUSTRIAL GROUP (FGP)
FGP industrial group is a dynamic and thriving organization supplying spare part of light and heavy vehicles.With the support years of experience in this field,the founder insists upon leading the marketin quality of product and inimatable aftermarket support.
This company is proud to provide its product all across iran to domestic car manufacture and exclusive agancies inside and abroud the country.This firm strives for self sufficency in production and generating employment by localizing the production technology,complying national and international standard and establishing a quality managent system.
FGP supplies all type of car spare part in the engine,transmission system,axle and brakes as following:cylender.spark plug,cable,waterpump,oilpump,brakedisk,camshaft,crankshaft,bush&piston,hub,knuckle,connecting rod,clutch,steering box,wheel hub,gas pump,boot,etc...
